Table of Contents
Advertisement
The illustration shows the recording of a field with straight
borders using the "Pause" button. With the vehicle lo-
cated in the upper left-hand corner of the field, the op-
erator starts recording and then immediately pauses until
the vehicle arrives at the next corner of the field.
NOTE: A point is immediately recorded when the "Record"
button is pressed after recording has been paused.
At the next corner, the operator presses the "Record" but-
ton and then the "Pause" button; recording is paused until
the operator presses the "Record" button at the next cor-
ner of the field.
NOTE: The map does not draw the boundary line while
recording is paused. When the next corner is recorded,
the map updates to display the straight boundary line
recorded during the pause.
In this fashion, a field boundary may be defined as a series
of straight line segments joined at the field corners.
NOTE: Use the "Stop" button to close the boundary after
the final corner of the field is passed.
3 - SETUP
3-121
25
RCIL11DSP264BBG
26
RCIL11DSP263BBG
Advertisement
Table of Contents
