Table of Contents
Advertisement
"Interface Level"
Two interface levels are available: "Basic" and "Ad-
vanced."
Choose "Advanced" if you intend to record the results of
your farming operations for analysis with the desktop soft-
ware. This includes summary data, "as applied" data, and
harvest results (yield and moisture). Choose "Basic" if you
do not intend to record production results.
NOTE: To enable mapping and data logging to the mem-
ory stick (for analysis with the desktop software), set the
"Interface Level" window to "Advanced."
Each individual application – harvesting, planting, spray-
ing – controls the effect of the "Basic" or "Advanced" set-
ting on that application.
Choosing "Basic" simplifies the structure of farming data:
fewer windows are required to perform operations and
temporarily store information in display memory. The "Ba-
sic" setting prevents logging to the memory stick, so the
increased simplicity also means that the summary data
and the production results will not be available for analy-
sis in the desktop software.
Press the "Interface Level" window to display the pop-up
options window.
Press the desired interface level to change the setting.
Press the "Close"
button to exit the window without
changing the current setting.
If the interface level is changed, a message displays: "The
change requires the display to perform a full reset. To
continue select Yes, or [select] No to cancel."
Press the "Yes" button to confirm the change and restart
the display.
Press the "No" button to cancel the request.
2 - ICONS AND WINDOWS
2-28
10
RCIL11DSP116BBG
11
RCIL11DSP117BBG
Advertisement
Table of Contents
