Import" Screen - Case IH AFS Pro 700 Software Operating Manual

"Import" screen

The data types that are discussed in the following pages
are not automatically shared between vehicles.
In most cases, the data that is imported is added to the
existing data on the display.
There are two exceptions for combines only: imported
crop setup information and imported crop calibration in-
formation replace the existing data in the display.
On the "Home" screen, press the "Data Management"
icon to access the "Data Management" screens.
NOTE: The memory stick from which the data is to be im-
ported must be inserted into the display before the display
is powered ON.
Press the "Import" icon in the navigation bar to display the
"Import" screen.
NOTE: The "Import" button remains unselectable until
both the "Data Type" and "Vehicle Name" windows are
populated.
4 - OPERATION
4-3
1
RCIL11DSP108BBG
2
RCIL11DSP297BBG