Table of Contents
Advertisement
• If the vehicle was moved, press the "Yes" button to clear
the message. Convergence will occur without position
recall. A message displays: "HP/XP/G2 convergence
has been restarted. A full convergence time can be
expected. You may move the vehicle in the meantime."
• If the vehicle was NOT moved, press the "No." button.
Convergence will occur with the time saving of position
recall.
An icon flashes in the status and warning
icon area to remind the operator that the
vehicle must not be moved.
NOTE: If you accidentally answer the question incorrectly,
reset the convergence process with the "HP/XP Conver-
gence" window on the "GPS Status" screen (Home > Di-
agnostics > GPS).
When the initialization process is complete, another mes-
sage displays: "You may now move the vehicle."
This message does NOT mean that the signal is con-
verged, but rather that you can move the vehicle without
interrupting the ongoing signal convergence.
Press the "OK" button to acknowledge and clear the mes-
sage.
3 - SETUP
3-76
23
RAIL14DSP1585BA
24
RAIL14DSP1590BA
25
RAIL14DSP1586BA
Advertisement
Table of Contents
