Table of Contents
Advertisement
5 - "PRINTER" APPLICATION
Introduction
Although distributed largely with software for combines, the "Printer" application is available for any farming operation
where capturing the content of the reporting windows on a screen is beneficial to an operator. The software is primarily
intended to capture the content of "Toolbox," "Performance," and "Diagnostics" screens.
The content of the windows is sent to a connected printer
or to a file on the memory stick. In both cases, the to-
tal screen is not printed. A simple text-only page or file
records the text content of the printable windows on the
selected screen.
The file output for the "Operator Setup" screen is shown
as an example. The screen name (1) is the first item on
the page. The windows with printable content are then
shown, separated by double line spaces. In each win-
dow group, the window name is the first line (2), and the
window setting or value (3) is the second line. The ap-
propriate unit of measurement, where applicable, is also
shown.
Printing – whether to a page or a file – is performed on
a screen by screen basis. Some screens and windows
cannot be printed. Messages guide the operator:
• If a screen contains printable content, a confirming
message displays.
• If a screen contains no printable content, a different in-
formational message displays.
NOTE: The left-hand area is never printable.
5 - "PRINTER" APPLICATION
5-1
1
RCPH11DSP023BBG
Advertisement
Table of Contents
