Table of Contents
Advertisement
Press the "Right Offset" window to access the numeric
keypad.
Use the keypad to enter the value in meters (feet). Enter
a negative value using the minus (-) symbol.
Press the "Enter" button on the keypad to save the value.
Press the "Close"
button to exit the keypad without
changing the value.
"DGPS Alarm"
The "DGPS Alarm" window controls
status icon behavior for Differential GPS
(DGPS). WAAS/EGNOS, OmniSTAR®,
CenterPoint™ RTX™, RangePoint™
RTX™, and RTK are considered DGPS
methods for this window.
For vehicles operating in conditions where DGPS correc-
tion signal is available and generally reliable, change this
setting to "Yes" to display the status icon when DGPS sig-
nal is lost.
For vehicles operating in conditions where DGPS correc-
tion is absent or frequently lost, change this setting to "No"
to suppress the status icon.
Press the "DGPS Alarm" window to access the pop-up
options window.
Press the desired setting.
"Logging Interval"
Press the down arrow on the scroll bar to view the second
"GPS Setup" screen.
The "Logging Interval" window indicates how frequently
GPS spatial data is logged to the memory stick for the
work in progress.
The default value is 1 s.
The "Logging Interval" window is inactive, and you cannot
change the value. The software controls this aspect of
GPS data logging.
3 - SETUP
3-43
20
RAIL14DSP1518BA
21
RAIL14DSP1519BA
22
RAIL14DSP1520BA
Advertisement
Table of Contents
