Table of Contents
Advertisement
Press the "Performance" icon to
access screens for viewing the
active data set and analyzing
operational results.
Press the "Data Management" icon
to access screens for importing
data, filtering data, deleting data,
and managing map items.
NOTE: The remaining icons are more vehicle-specific.
Refer to the vehicle operator's manual.
When any "Home" screen icon is pressed, the application
uses "last screen recall" to determine which screen to dis-
play.
NOTE: The "Toolbox" screens are shown as an example.
The first time an operator enters the "Toolbox" screens in
the current work session, the first screen ("Display Setup")
is shown by default.
Thereafter, when the operator enters the "Toolbox"
screens, the last screen that was viewed displays.
"Last screen recall" is used uniformly through all the func-
tional icons. "Last screen recall" persists until the display
is powered OFF at the end of the work session.
All "Toolbox" screens share the same navigation bar (1)
at the bottom of the screen.
Each "Toolbox" screen displays the "Toolbox" icon (2) and
a screen label (3).
Press any icon in the navigation bar to access the screen
for that icon.
Press the "Back" icon on the navigation bar to return to
the previous screen or the "Home" screen.
2 - ICONS AND WINDOWS
2-15
6
RCIL11DSP006ABG
7
RCIL11DSP002ABG
8
RCIL11DSP100BBG
Advertisement
Table of Contents
