Use the keypad to enter a new name for the vehicle.
Press the "Enter" button on the keypad to save the name.
On some tractor series, the "Vehicle" screen contains the
model and PIN windows, but the windows are both report-
ing windows that the operator cannot select or modify.
The tractors are identified by PIN or serial number, and the
display does communicate with the vehicle controllers on
the Controller Area Network (CAN) bus. Vehicle-specific
calibrations are saved to the vehicle's PIN or serial num-
ber.
With these tractors, the "Vehicle Name" window is only
available on the "Run" screens:
1. Press the "Vehicle Name" window to change the name.
2. Press "Edit Name" to access the alphanumeric key-
pad.
3. Use the keypad to enter a new name for the vehicle.
4. Press the "Enter" button on the keypad to save the
name.
2 - ICONS AND WINDOWS
2-53
5
RCIL11DSP173BBG
6
RCIL11DSP457BBG