Table of Contents
Advertisement
If Start was pressed, a "Recording Boundary"
icon displays in the status and warning
icon area as a reminder that recording is
in progress. The "Rec Boundary" window
updates with the "Pause" button, the
"Stop" button, the "Cancel" button, and the
"Recording" message.
NOTE: The "Recording Edge" window determines
whether the fence in the icon appears in the left, center,
or right of the icon.
The "Recording Boundary" icon in the status and warning
icon area disappears when the boundary is automatically
completed or when the operator presses the "Stop" button
or the "Cancel" button.
The vehicle can be working while boundary recording
takes place. Coverage and work results can be recorded
at the same time.
The exact path that the vehicle travels is recorded as the
field boundary.
The boundary can be completed in one of two
ways, depending on the selection in the "Bound.
Auto-Complete" window on the "Precision Farming
Setup" screen (Home > Toolbox > PF):
• When the "Bound. Auto-Complete" window is set to
"On," the software automatically closes the boundary
when the vehicle is within one implement width (or
header width) of the boundary's starting point.
• When the "Bound Auto-Complete" window is set to
"Off," the operator must press the "Stop" button in
the "Rec Boundary" window. The software draws a
straight line from the vehicle's current position to the
boundary's starting point.
A "Boundary is complete" message displays.
Press the "OK" button to acknowledge and clear the mes-
sage.
3 - SETUP
3-117
17
RCIL11DSP058BBG
18
RCIL11DSP278BBG
19
RCIL11DSP277BBG
Advertisement
Table of Contents
