Table of Contents
Advertisement
Most status icons communicate simpler messages:
• An object is present or missing.
• A function is enabled or disabled.
OR
• A tool is raised or lowered.
The table below lists some of the more common icons you
may encounter in the "Framework," "Precision Farming,"
"Virtual Terminal," and "Telematics" applications.
The table below lists some of the more common icons you
may encounter in the "Framework," "Precision Farming,"
and "Virtual Terminal" applications.
Some status icons are unique to the vehicle or the various
farming applications. Refer to the vehicle operator's man-
ual or the software operating guide for information about
other unique status icons.
NOTE: Many status and warning icons are interactive.
Press the icon to display additional information.
The GPS receiver has acquired a valid
GPS signal, but not a valid Differential
GPS (DGPS) signal, if applicable.
Real Time Kinematic (RTK) correction
signal has been interrupted. xFill™ is
providing correction signal temporarily.
Field boundary recording is in progress.
Field obstacle recording is in progress.
The display detects the presence of
the memory stick. The memory stick
must be inserted before powering the
display for it to be detected.
An active grower, farm, field, and task
must be selected before data can be
recorded.
The implement is raised.
2 - ICONS AND WINDOWS
2-21
5
RCIL11DSP265BBG
6
RCIL11DSP376BBG
Differential GPS (DGPS) correction
signal is in use.
A latching "Field Mark" button is actively
marking its selected condition.
The vehicle (with its implement or
header) is approaching a field boundary
or the end of the swath.
The vehicle (with its implement or
header) is approaching a field obstacle.
Recording to the memory stick is in
progress.
Recording to the display memory is in
progress. Data is not being recorded to
the memory stick.
The implement is lowered.
Advertisement
Table of Contents
