Gps Receiver" Screen - Case IH AFS Pro 700 Software Operating Manual

3 - SETUP

"GPS Receiver" screen

NOTICE: Only make adjustments on this screen if you are
directed to do so by authorized Case IH service person-
nel. Changing settings on the GPS receiver may disable
your system.
The "GPS Receiver" screen, or Receiver Diagnostic Inter-
face (RDI), is provided for advanced diagnostic and trou-
bleshooting procedures. The screen provides access to
the configuration settings on the GPS receiver. Changing
settings, even inadvertently, may degrade or disable your
precision farming system.
The screen is provided for those rare occasions when an
operator may need to change satellite frequencies, con-
figure an additional port, or adjust a configuration for a
unique GPS receiver. Perform such changes only at the
specific instruction of Case IH service personnel.
Press the "RDI" icon on the navigation bar to display the
"GPS Receiver" screen.
NOTE: The screen is only selectable when the display
is connected to an AFS 162, 252, 262, or 372 receiver
(or an equivalent Trimble® receiver). The icon is dimmed
when a GPS receiver is not present or is from another
manufacturer.
1
RCIL11DSP408BBG
3-97