Table of Contents
Advertisement
"Home" screen area
The icons on the "Home" screen organize the screens for
all farming applications by function.
Autoguidance, performance, planting, harvesting, and
any vehicle-specific applications can add components to
these navigation icons.
Press the "Toolbox" icon to
access screens for setting
display preferences and operator
preferences, customizing the
"Run" screens, setting up the
GPS receiver, etc. The selections
vary with the applications that are
installed. The "Toolbox" screens
provide the location where shared
tools can be configured.
Press the "Run" icon to access the
six customizable screens for all
applications that are installed on the
display. These are the screens that
the operator normally uses while
operating the equipment.
NOTE: The names for the "Run" screen navigation icons
cannot be edited.
Press the "Diagnostics" icon to
access screens for checking
software versions, controller status,
specific sensor signals, resource
usage, GPS signal status (if
equipped), GPS receiver interface
(if equipped), and fault codes.
Press the "Calibration" icon to
access the screens for vehicle-
and application-specific calibrations
such as distance, area, crop,
steering sensor, etc.
2 - ICONS AND WINDOWS
2-14
1
RCIL11DSP003ABG
2
RCIL11DSP001ABG
3
RCIL11DSP004ABG
4
RCIL11DSP012ABG
5
RCIL11DSP005ABG
Advertisement
Table of Contents
