Table of Contents
Advertisement
Elevation cutoff stops the GPS receiver from using satel-
lites that are low on the horizon. Reception from low satel-
lites is subject to more atmospheric error and multipath
interference.
For autoguidance systems using RTK, set this value to
13 °.
For systems using DGPS, set this value to 10 °.
Click the "Time Zone" button to select the time zone for
your location.
Highlight your time zone in the list.
Click the "OK" button to select the time zone.
Use the Time portion of the screen to select a time period
for the information to be viewed.
Start with a 24 h period and adjust the time period later if
required.
3 - SETUP
3-103
12
RAPH12DSP0973BA
13
RAPH12DSP0974AA
14
RAPH12DSP0975AA
15
RAPH12DSP0976AA
Advertisement
Table of Contents
