Table of Contents
Advertisement
Field marks
Use the "Field Marks 1-2" and "Field Marks 3-4" windows
to mark GPS locations in a field during farming opera-
tions. The locations marked are field or crop conditions
that require additional attention at some future time. This
function requires that the vehicle is equipped with a GPS
receiver.
The "Field Marks 1-2" and "Field Marks 3-4" windows are
available for placement on the "Run" screens whenever
the "Precision Farming" application is present. The win-
dows are not part of the default layout and must be added
to a "Run" screen. If required, create a new name in
the "Current Layout" window on the "Run Layout" screen
and add the windows to the "Run" screen of your choice
(Home > Toolbox > Layout).
The conditions which are marked with the "Field Marks
1-2" and "Field Marks 3-4" windows are created by the
operator during field mark setup. Up to four conditions
can be active at one time, and field marks can be changed
at any time.
No audible or visual warning occurs when the vehicle ap-
proaches a field mark in subsequent farming operations.
When the operator presses a "Field Mark" button, the GPS
coordinates for the location are both mapped and saved
along with the other coverage, harvesting, "as applied," or
performance data that is being recorded.
Each "Field Mark" button can be set up as a momentary
push button or a latching button.
When pressed, a momentary "Field Mark" button records
a single symbol to the map and saves it with the other
data.
Press the button each time a location requires marking.
3 - SETUP
3-139
1
RCIL11DSP068BBG
2
RCIL11DSP282BBG
Advertisement
Table of Contents
