Table of Contents
Advertisement
Press the "Save" button to save the mappings.
A pop-up message displays: "Auxiliary Control Mappings
for selected implement will be saved. Proceed?"
Press the "Yes" button to save the new auxiliary control
mappings.
Press the "No" button to clear the new auxiliary control
mappings..
After you press the "Yes" button, the "Input Enabled" icon
displays in each row that has a valid mapping. The con-
trols that you mapped will now control the functions of the
ISOBUS implement or tool.
The settings reside in the implement and persist – even
over power cycles – until an operator edits them or deletes
them.
NOTE: Because the settings reside in the implement, you
can replace the display or perform a clean install of the
display software without losing the auxiliary control map-
pings.
If you wish to discontinue use of the ISOBUS implement or
tool for any reason, you can press the "Delete" button on
the "Auxiliary Controls" screen to clear the auxiliary control
mappings.
6 - VIRTUAL TERMINAL (VT) OR UNIVERSAL TERMINAL (UT)
6-17
21
RAIL14DSP1422BA
22
RAIL14DSP1423BA
23
RAIL14DSP1382BA
Advertisement
Table of Contents
