Table of Contents
Advertisement
The functions for the tool – raise, lower, hold, float, and
dump – load into the first column on the screen . If nec-
essary, this screen extends downward to display all func-
tions for the tool. Use the scroll bar on the left-hand side
of the "Auxiliary Controls" screen to view any remaining
functions that do not display on the first screen.
A "Save" button and a "Delete" button display at the top of
the screen next to the ISOBUS implement/tool selection
window.
The second column represents the ISOBUS input devices
on the vehicle that are available for mapping.
A blue circle with a white "X" in the second column indi-
cates that no device is currently assigned to the corre-
sponding tool function.
Press the device icon next to the first function – loader
raise in this example – to access the pop-up icon window.
The pop-up window displays icons for the ISOBUS input
devices on the vehicle that are appropriate to this function.
The icon in this example is for an ISO joystick.
NOTE: If no devices are present for this function, the
pop-up window contains no options; a blue circle with an
"X" displays.
Press the joystick icon to assign this ISOBUS input device
to the loader raise function.
The icon for the joystick displays in the device column for
the loader raise function.
6 - VIRTUAL TERMINAL (VT) OR UNIVERSAL TERMINAL (UT)
6-12
7
RAIL14DSP1415BA
8
RAIL14DSP1415BA
9
RAIL14DSP1416BA
Advertisement
Table of Contents
