Table of Contents
Advertisement
3 - SETUP
Field obstacles
Field obstacles can be created with the display when:
• The "Precision Farming" application is present
AND
• The vehicle is equipped with a GPS receiver
NOTE: The memory stick must be present when the op-
erator creates an obstacle on the display.
NOTE: Field boundaries can also be created with the
desktop software.
The "Rec Obstacle" window (placement label: Obstacle
Record) is not part of the default layout and must be added
to a "Run" screen. If required, create a new name in the
"Current Layout" window on the "Run Layout" screen and
1
RCIL11DSP051BBG
add the "Rec Obstacle" window to the "Run" screen of
your choice (Home > Toolbox > Layout).
One field can contain multiple obstacles as needed. All
obstacles are saved to the field. If a field is deleted on
the "Delete" screen (Home > Data Management > Delete),
all of the obstacles for the field are also deleted. Delete
individual obstacles using the "Map" screen (Home > Data
Management > Map).
3-127
Advertisement
Table of Contents
