Table of Contents
Advertisement
"Activation Code"
Press the down arrow on the scroll bar to view the second
"GPS Setup" screen.
Use the "Activation Code" window to input an activation
code for CenterPoint™ RTX™ or RangePoint™ RTX™
correction signal.
NOTE: Contact your CASE IH dealer for an activation
code. Your dealer will require the serial number of your
GPS receiver. The serial number of your GPS receiver
displays at the top of this window for your convenience.
Press the "Activation Code" window to access the al-
phanumeric keypad.
Use the keypad to input the activation code from your
CASE IH dealer.
Press the "Enter" button on the keypad to save the acti-
vation code.
Press the "Activate" button to enable signal correction.
A pop-up message displays: "Code Activated."
Press the "OK" button to dismiss the message.
The newly activated correction type is now available in the
"Correction Type" window.
3 - SETUP
3-45
26
RAIL14DSP1509BA
27
RAIL14DSP1510BA
Advertisement
Table of Contents
