Table of Contents
Advertisement
"Obstacles"
User-defined field obstacles appear on the work map,
when enabled, along with the other active map layers.
NOTE: Even if an operator chooses not to display obsta-
cles, the display still warns the operator if the path of the
vehicle (with its implement or header) will contact the ob-
stacle.
All obstacles types – closed, open or point – normally dis-
play in amber. An obstacle on the map turns red when the
vehicle (with its implement or header) enters the warning
zone as defined in the "Look Ahead Time" window on the
"Precision Farming Setup" screen (Home > Toolbox > PF).
NOTE: See 3-127 for information about field obstacles.
Press the "Layer" button to access the "Map Layer" win-
dow.
Press the "Obstacles" window to display the pop-up op-
tions window.
Press "On" to display obstacles with the other active map
layers.
Press "Off" to hide the obstacles.
Press the "OK" button to save the selection and close the
"Map Layer" window
3 - SETUP
3-159
42
RCIL11DSP280BBG
43
RCIL11DSP251BBG
44
RCIL11DSP252BBG
Advertisement
Table of Contents
