"Stop" button
Press the "Stop" button while recording a boundary to im-
mediately complete the boundary with a straight line be-
tween the current position of the vehicle and the boundary
starting point.
The "Recording Boundary" icon disappears from the sta-
tus and warning icon area.
This is useful whenever a straight line is appropriate to
complete a boundary.
In this example, boundary recording starts in the upper
left-hand corner of the field and proceeds clockwise
around its circumference.
On the fourth side of the field, the operator presses the
"Stop" button to complete the boundary with a straight line.
The final section of the boundary is automatically mapped
as a straight line (shown in red) between the current ve-
hicle location and the start of the boundary.
3 - SETUP
3-119
21
RCIL11DSP058BBG
22
RCIL11DSP458BBG