Table of Contents
Advertisement
If the "Channel ID" window displays the message "No Ra-
dio," and the window cannot be selected, the NAV II navi-
gation controller cannot communicate with the RTK radio
on the vehicle to retrieve its current network ID setting.
This may be caused by a missing or loose cable or a port
configuration problem.
Contact your CASE IH dealer.
You must input a subscription key to communicate with
any base station that is configured to use RTK security.
This key should be provided by the operator of the base
station.
Press the "Edit" button in the "RTK Security" window to
access the "RTK Security" pop-up window.
The "RTK Security" pop-up window displays.
Press the "Key #1" window to access the alphanumeric
keypad.
3 - SETUP
3-51
9
RAIL14DSP1528BA
10
RAIL14DSP1526BA
11
RAIL14DSP1529BA
Advertisement
Table of Contents
