3 - SETUP
Autonomous (raw GPS) setup
The "Autonomous" selection is available for remote re-
gions of the globe where no corrected differential GPS
is available. When "Autonomous" is selected in the "Cor-
rection Type" window, the system uses raw, uncorrected
GPS for data collection and vehicle control.
While the pass-to-pass functionality for some farming op-
eration may be acceptable, any operation requiring ex-
act data collection and positioning will suffer. Obstacle
and boundary creation are not recommended when "Au-
tonomous" is selected. If there is any significant lapse of
time between their creation and further use, the obstacles
and boundary will shift significantly.
Press the "Correction Type" window to access the pop-up
options window.
1
RAIL14DSP1556BA
Press "Autonomous" in the options window.
No further setup is required for raw GPS.
3-81