Case IH AFS Pro 700 Software Operating Manual page 230

"Data Type"
"Coverage" is the default data type that is common to all
applications on the display. "Coverage" shows the path
of the vehicle (with its implement or header) through the
field when work mode is detected.
The other available data types depend on both the
vehicle and the application that is in use:
• On some combines, the additional options are "Mois-
ture" and "Yield."
• On some tractors, the additional option is "Fuel Econ-
omy."
• When the "As Applied" application is present, the op-
tions may be "Granular," "Liquid," "Seed," "Seed Left, "
"Seed Right," "ManApp1," "ManApp2," "ManApp3," and
"ManApp4."
Press the desired selection.
The "Map Layer" window updates with the new setting.
Press the "OK" button to close the "Map Layer" window.
3 - SETUP
3-148
9
RCIL11DSP272BBG
10
RCIL11DSP273BBG
11
RCIL11DSP274BBG