Table of Contents
Advertisement
The operator can view swath creation with a map window
while recording a swath.
For curve and spiral swaths, the swath being recorded ap-
pears as a black line and updates as each new GPS co-
ordinate is recorded. An arrow indicates the vehicle loca-
tion. The location where the "Start" button or the "Mark 1"
button was pressed appears as a black circle. The num-
ber within the circle identifies which "Swath Recorder" win-
dow is in use: "Swath 1 Recorder" or "Swath 2 Recorder."
For circle swaths, "Mark 1", "Mark 2," and "Mark 3" points
must be recorded before the swath can be displayed.
Since the swath is completely recorded when the "Mark
3" button is pressed, the map screen immediately updates
when the swath is selected.
For straight swaths and heading swaths, the location
where the "Mark A" button was pressed appears as a
black circle.
Since the swath is completely recorded
when the "Mark B" button or the heading is entered,
the map screen immediately updates when the swath is
selected.
Press the "Layer" button to access the "Map Layer" win-
dow.
Press the "Swath" window to display the pop-up options
window.
3 - SETUP
3-155
30
RCIL11DSP243BBG
31
RCIL11DSP244BBG
32
RCIL11DSP245BBG
Advertisement
Table of Contents
