Table of Contents
Advertisement
"Forward Offset"
The forward offset (x axis) is the distance from the GPS
receiver to the GPS reference point of the vehicle. Take
the measurement on the ground between the center of
the appropriate axle and the bottom center of the GPS
receiver. If the receiver is to the front of the corrected
location, enter a positive value. If the receiver is to rear of
the corrected location, enter a negative value [using the
minus (-) symbol].
NOTE: Directions are from the perspective of the operator
seated in the operator's seat.
NOTE: Position the vehicle on flat, level ground to mea-
sure forward offset.
Press the "Forward Offset" window to access the numeric
keypad.
Use the keypad to enter the value in meters (feet). Enter
a negative value using the minus (-) symbol.
Press the "Enter" button on the keypad to save the value.
Press the "Close"
button to exit the keypad without
changing the value.
"Right Offset"
The right offset (y axis) is the distance from the bottom
center of the GPS receiver to the center line of the vehi-
cle. If the receiver is to the right of the corrected location,
enter a positive value. If the receiver is to the left of the
corrected location, enter a negative value [using the mi-
nus (-) symbol].
NOTE: Position the vehicle on flat, level ground to mea-
sure right offset.
3 - SETUP
3-42
17
RCIL11DSP304BBG
18
RAIL14DSP1517BA
19
RCIL11DSP307BBG
Advertisement
Table of Contents
