To selectively delete work conditions from display
memory and the memory stick:
1. Select "Work Condition" in the "Data Type" window.
2. Select an implement or crop type in the "Implement"
window or the "Crop Type" window.
3. Press the "Work Condition" window to access the
pop-up options window.
4. Select the work conditions to be deleted.
5. Press the "Enter" button to confirm the selection.
6. Press the "Delete" button to delete the selected work
conditions.
7. Press the Yes" or "No" button at the confirmation mes-
sage.
4 - OPERATION
4-16
18
RCIL11DSP323BBG
19
RCIL11DSP324BBG