Table of Contents
Advertisement
Press the correct port for your modem configuration or
press "Disabled" to leave the file transfer feature disabled.
When the modem establishes
communication with the server, the
cloud icon displays in the status and warning
icon area.
If there is a conflict with the selected port –
for example, another software application
needs to communicate on the port – the
cloud icon updates with an exclamation
point. A pop-up message identifies
the conflicting software application and
asks if you want to close the "Telematics"
application to allow the conflicting application
to access the port.
You can press the cloud icon to view the server connection
status in a pop-up message.
Press the "OK" button to dismiss the message.
"Data Transfer"
When you enable the file transfer feature, the "Data Trans-
fer" window displays on the "Telematics" screen.
Use the "Sync" button in the "Data Transfer" window to
perform the initial synchronization with the server. You
only need to do this when you set up telematics for the
first time. Thereafter, the display automatically transmits
new or changed data at 30 min intervals and when you
turn the display OFF.
NOTE: The the initial synchronization may take several
minutes.
Press the "Sync" button to initiate the file transfer.
7 - "TELEMATICS" APPLICATION
7-5
13
RAIL14DSP1626BA
14
RAIL14DSP1628BA
15
RAIL14DSP1627BA
Advertisement
Table of Contents
