Case IH AFS Pro 700 Software Operating Manual page 280

Boundary
Boundaries are always recorded for a specific field. A field
can contain multiple boundaries, and all boundaries are
deleted when the field is selected, either individually or
within its farm and grower structure.
To delete all boundaries from display memory and the
memory stick:
1. Select "Boundary" in the "Data Type" window.
2. Select "All" in the "Grower" window.
NOTE: Only growers that have boundaries saved to the
fields of their farms display. If only one grower is present
on the memory stick, only one grower is available for se-
lection.
3. The "Farm" and "Field" windows default to "All" when
"All" is selected in the "Grower" window.
4. Press the "Delete" button to delete all boundaries on
the memory stick.
5. Press the "Yes" or "No" button at the confirmation mes-
sage.
To delete a specific field's boundaries from display
memory and the memory stick:
1. Select "Boundary" in the "Data Type" window.
2. Use the "Grower" window to filter the boundaries to all
or one grower.
3. Use the "Farm" window to filter the boundaries to all or
one farm.
NOTE: Only farms that have boundaries saved to their
fields display. If only one farm is present on the memory
stick with boundaries saved to its fields, only one farm is
available for selection.
4. Use the "Field" window to filter the data to all or se-
lected fields.
5. Press the "Enter" button to confirm the selection.
6. Press the "Delete" button to delete the selected bound-
aries.
7. Press the "Yes" or "No" button at the confirmation mes-
sage.
NOTE: Use the "Map Management" screen, explained
later in this chapter, to delete individual boundaries.
4 - OPERATION
4-20
27
RCIL11DSP335BBG
28
RCIL11DSP337BBG
29
RCIL11DSP339BBG