Table of Contents
Advertisement
"Correction Type"
Use the "Correction Type" window to select the DGPS
correction technology that is in use.
• If an AFS 162, 252, 262, or 372 receiver (or an equiv-
alent Trimble® receiver) is in use, the software auto-
matically detects the type of DGPS correction in use
and displays it in the "Correction Type" window.
• If another brand of GPS receiver is in use, the "Correc-
tion Type" window does not display. These receivers
may be used as long as they provide valid GPS input to
the system.
NOTE: If you have an AFS 162, 252, 262, or 372 re-
ceiver (or an equivalent Trimble® receiver) and the "Cor-
rection Type" window does not display on the "GPS Setup"
screen, make sure that the "Connection Type" window has
the correct option selected. If the "Correction Type" win-
dow still does not display, check the connection to the
GPS receiver and reboot the display.
Press the "Correction Type": window to access the pop-up
options window.
NOTE: The pop-up options window only includes the
types of correction signal that have been activated for
your receiver. The "Autonomous" option (no correction)
and the "WAAS/EGNOS" option are available without ac-
tivation. Other options display only if they are activated.
Press the correct option for
The setting in the "Correction Type" window determines
which additional windows display on the "GPS Setup"
screen.
• "RTK": see 3-47
• "CenterPoint RTX": see 3-62
• "OmniSTAR": see 3-68
• "RangePoint RTX": see 3-78
• "WAAS/EGNOS": see 3-80
• "Autonomous": see 3-81
3 - SETUP
3-46
28
RAIL14DSP1522BA
Advertisement
Table of Contents
