Case IH AFS Pro 700 Software Operating Manual page 112

4. Press the "Operation" window, if present, to select the
desired operation.
Select the appropriate operation from the pop-up op-
tions window.
NOTE: This window is only present for vehicles that
perform multiple operations or apply multiple products.
5. Press the "Operational Instance" window, if present, to
select the desired instance for the selected operation.
Select the appropriate operational instance from the
pop-up options window.
NOTE: This window is only present for vehicles that
perform multiple operations or apply multiple products.
The "Area" window updates with the recorded area for
the selected field, operation, and instance. This is the
value that was recorded by the farming software and
saved to the memory stick.
3 - SETUP
3-30
6
RCIL11DSP192BBG
7
RCIL11DSP507BBG
8
RCIL11DSP508BBG