Table of Contents
Advertisement
AG & NAV faults
Autoguidance and NAV II navigation controller faults can
be deleted only with the "Delete" screen. Faults with an
"AG" prefix are autoguidance faults; faults with a "NAV"
prefix are NAV II controller faults.
Faults can be deleted only when they are no longer active.
Selection of of "All" in the AG & NAV Faults window only
deletes inactive faults.
Deleting faults requires:
• Selection of "AG & NAV Faults" in the "Data Type" win-
dow
• Selection of "All" in the AG & NAV Faults window
Current layout
The display stores up to 20 unique layouts for the "Run"
screens for each vehicle type. Deleting a layout removes
the named layout from display memory and the memory
stick for the current vehicle type.
NOTE: Only the layouts for the current vehicle display
when this data type is selected.
Deleting layouts requires:
• Selection of "Current Layout" in the "Data Type" window
• Selection of "All" or specific layouts with the "Current
Layout" window
Field mark setup
Up to twenty field mark conditions can be saved on the
display or the memory stick at one time. Deleting a field
mark setup removes the named condition from display
memory and the memory stick.
Deleting field marks requires:
• Selection of "Field Mark Setup" in the "Data Type" win-
dow
• Selection of "All" or specific field mark conditions with
the "Field Mark Setup" window
4 - OPERATION
4-22
33
RCIL11DSP356BBG
34
RCIL11DSP344BBG
35
RCIL11DSP571BBG
Advertisement
Table of Contents
