Case IH AFS Pro 700 Software Operating Manual page 196

Press the "Recording Edge" window.
Press "Left" to select the outermost left edge of the imple-
ment (or header) as the distance from the GPS receiver
to record the boundary.
Press "Center" to select the centerline of the vehicle in-
tersecting the GPS receiver as the location to record the
boundary.
Press "Right" to select the outermost right edge of the
implement (or header) as the distance from the GPS re-
ceiver to record the boundary.
The operator must indicate whether the new boundary is
an outer boundary or an inner boundary.
Press the "Boundary Type" window to access the pop-up
options window.
3 - SETUP
3-114
8
RCIL11DSP052BBG
9
RCIL11DSP054BBG
10
RCIL11DSP052BBG