Case IH AFS Pro 700 Software Operating Manual page 205

Boundary warning
The "Bound Alarm Audio" window on the
"Precision Farming Setup" screen (Home
> Toolbox > PF) determines whether an
audible alarm sounds when the vehicle
(with its implement or header) enters the
boundary warning zone.
The audible alarm is automatically enabled and cannot
be disabled whenever the "Autoguidance" application is
active in the display. The window is dimmed and can-
not be selected. The audible alarm beeps slowly for 3 s,
and then more rapidly for 2 s to alert the operator that the
vehicle (with its implement or header) is approaching a
field boundary. After this 5 s period, a single alarm tone
sounds once every 30 s until the warning condition clears.
The alarm is accompanied by a flashing "Approaching
Boundary" icon in the status and warning icon area.
When the "Autoguidance" application is not active, the op-
erator can turn the audible alarm ON or OFF. If the alarm is
turned on, a single tone sounds once every 30 s until the
warning condition clears. If the alarm is turned OFF, no
audible alarm occurs. The "Approaching Boundary" icon
displays in the status and warning icon area regardless of
whether the audible alarm is turned ON or OFF. The icon
flashes when the alarm is turned ON and displays without
flashing when the alarm is turned OFF.
NOTE: The alarm behavior occurs if any part of the vehi-
cle (with its implement or header) enters the alarm zone.
The alarm zone is different for forward and reverse oper-
ation.
If the vehicle is operating in a forward gear, the
approaching boundary warning occurs.
• When the vehicle is within 5 m (16 ft) of the boundary
OR
• When the vehicle, at its current speed, is within the
alarm look ahead distance of the boundary, as defined
in the "Alarm Look Ahead" window (Home > Toolbox >
PF)
3 - SETUP
3-123
29
RCIL11DSP265BBG
30
RCIL11DSP473BBG
31
RCIL11DSP473BBG