Table of Contents
Advertisement
"Boundary Auto-Complete"
The "Boundary Auto-Complete" window determines
boundary completion behavior when creating a boundary
with the "Rec Boundary" window.
When set to "On," the boundary being recorded is auto-
matically completed if the vehicle comes within one imple-
ment width of the starting point.
When set to "Off," the boundary being recorded is only
completed if the operator presses the "Stop" button in the
"Record Boundary" window.
NOTE: "On" is the default setting for the "Boundary Auto-
Complete" window. If, when recording a boundary, the
corner of the field gets cut off, try recording the same
boundary with the "Boundary Auto-Complete" window set
to "Off." Drive the entire boundary to the desired end point,
then press the "Stop" button in the "Record Boundary"
window.
2 - ICONS AND WINDOWS
2-60
11
RCIL11DSP480BBG
12
RCIL11DSP482BBG
Advertisement
Table of Contents
