Loading Paper Into Tray 5 (Bypass Tray) - Xerox DocuPrint C2428 User Manual

4.2.2

Loading Paper into Tray 5 (bypass tray)

To print postcards, envelopes, or non-standard size paper which cannot be
loaded in Trays 1 to 4, use Tray 5 (bypass tray). This section describes how to
load paper into Tray 5 (bypass tray).
Set paper type in the [Tray/Output] tab of the printer driver.
Procedure
1
Open Tray 5 (bypass tray).
If necessary, pull out the extension tray. The extension
tray can be pulled out in two stages.
2
Check the position of the paper guide
located in front of Tray 5 (bypass tray).
3
Insert paper with the side to be printed
facing down, and push it right to the
end.
Different size or type paper cannot be loaded together.
●
It may cause paper jams.
Do not load paper exceeding the maximum fill line. It
●
may cause paper jams or machine breakdown.
If thick paper such as postcards are curled, uncurl
●
them before loading. However, if paper is too curled
or creased, it may cause paper jams.
Loading of postcard, envelope, or long-size paper varies
individually. Refer to "3.2 Printing Transparencies"
(P.62) and "3.3 Printing Non-Standard/Long Paper
Sizes" (P.65).
4.2 Loading Paper
4
119