Original Size Defaults; Original Size Defaults Overview; Selecting Original Size Defaults - Xerox Versant 80 Press System Administration Manual

9. Select Save.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.

Original Size Defaults

Original Size Defaults Overview

Set the original sizes displayed in Layout Adjustment > Original Size . You can assign
original sizes to the buttons (except the Auto Detect button).
If you frequently make non-standard size copies, setting default non-standard sizes can
avoid extra operations required during the use of the machine. Original Size Default
options include the following:
A/B Series Size
Select a size from A and B series sizes.
Inch Size
Select a size from inch series sizes.
Others
Select a size from other sizes.
Custom Size
Enter any size. Set the width (X) from 15 to 432 mm, and the height (Y) from 15 to
297 mm in 1 mm increments.

Selecting Original Size Defaults

1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Copy Service Settings .
5. Select Original Size Defaults.
The Original Size Defaults screen displays.
6. Select the item to be set.
7. Select Change Settings.
8. Select the desired setting for the option.
9. Select Save.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
4-45