Making A Copy The Same Size As The Original Document - Xerox 8830 User Manual

Making copies (continued)
Making a copy the same size as the original
document
1. Set the Media Selection Source to Auto. The Auto lamp illuminates.
This setting allows the 8825/8830 DDS to automatically select the
available media roll on which the width of the image fits the best.
2. Select the Type of media. The default setting is Bond.
3. Set the Output Format to Synchro. This setting cuts the media to the
same length as the original document.
4. Set Reduction & Enlargement to Preset. If the size is not already set
to 100%, enter 100 and press the Enter key.
5. Now, insert the document face down into the Scanner. If the scan does
not start automatically, press the Start key.
Note: to set the scan to begin automatically, refer to Automatic and manual
start, explained previously.
If the correct size of media is not loaded, the next larger size roll will be used
Note: if the 8825/8830 DDS must rotate the image in order to fit it on the
selected media size, then additional processing time is required. Feed the
original image such that no rotation of the image is required, if possible, in
order to obtain the fastest processing time.
For example, if an A size copy is required, on a 12 inch (30.48 cm) roll, feed
the original with the short edge first, not the long edge first. If a B size copy
is required on a 17-inch roll, feed the document with the long edge first, not
the short edge first.
The Scanner scans the document, and the Printer (if not already busy) prints
the copy immediately. If the Printer is busy when the scan is made, the copy
will be printed when the printer becomes available.
When the Scanner detects the trail edge of the document, the 8830
automatically cuts the media so that the copy is the same length as the
original document.
Note: if the following options are set, then the 8825/8830 DDS will start to
print while the scan is still in process, delivering the copy sooner:
Source: any setting except Sheet; Output Format: Synchro; Type: LINE;
Reduction & Enlargement = 100%, Auto Rotation = OFF, Sample = OFF,
Mirror = NONE, Margins = None set.
Note: t he maximum length of 36 inch (91.4 cm) wide image that can be
stored in the standard amount of memory is:
Type
Line (light to medium
density)
Photo
Mixed
8825/8830 DDS User Guide/34
Maximum Length
approximately 100 feet (30.5 m)
approximately 28 feet (8.5 m)
approximately 24 feet (7.3 m)