Watermark - Xerox 770 Digital Color Press System Administration Manual

System Settings > Common Service Settings
• Y Print Position
• X% - Magnification Width
• Y% - Magnification Length
• Perpendicularity
• Skew
18. Select Change Settings.
The selected alignment item screen displays.
19. Enter the desired changes and select Save.
The Type X screen displays (for example Type 1).
20. Print another sample printout, review the sample, and if necessary continue to make
adjustments as required.
21. After you complete adjustment, print a final sample printout with Sample Printout
and check the adjustment results.
22. Select Save.
The Alignment Adjustment Type Setup screen displays.
23. Select Close.
The Alignment Adjustment Setup screen displays.
24. Select the tray where the paper is loaded; this tray will be assigned to the current
Type X.
25. Select Change Settings.
The Alignment Adjustment Setup Tray window displays.
26. Select the type to which you made the adjustments (for example Type 1), and then
select Save.
The Alignment Adjustment Setup screen displays.
27. Select Close.
The Maintenance screen displays.
28. Select Close.
The main Tools tab screen is displayed.
29. Exit administrator mode.
Related Topics:
Alignment Adjustment

Watermark

Use this feature to configure default settings for commonly used watermarks; options
include the following:
2-32 ®
Xerox 770 Digital Color Press
System Administration Guide