Image Formation System; Removing The Developing Assembly - Canon imageRUNNER ADVANCE 4551i Service Manual

Image Formation System

Removing the Developing Assembly

■ Preparation
1. Remove the Drum Unit.
■ Procedure
1. Remove the Developing Assembly [1].
• 1 Connector [2]
CAUTION:
Points to Note at Installation
• Be sure to insert it with the guide [1] of the Developing Assembly fitted in the groove [2] of the host machine.
"Removing the Drum Unit" on page 259
1x
[2]
[2]
[1]
[1]
252
4. Disassembly/Assembly