Canon imageRUNNER ADVANCE 4551i Service Manual page 787

COPIER > OPTION > USER
PH-D-SEL
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
COPY-JOB
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
OP-SZ-DT
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JOB-INVL
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
2 Set dither matrix at screen processing
To set the screen dither matrix to be used for halftoning processing at the time of copy output,
B&W Inbox scan output and B&W SEND output.
When moire occurs frequently, set to 1.
When the setting is changed, the number of PG lines to be output at PASCAL control is also
changed.
When moire frequently occurs at the time of copy output, B&W Inbox scan output and B&W SEND
output. Especially when moire frequently occurs in the halftone density area of photo and image
gradation areas
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: 134 lines, 1: 141 lines
0
COPIER> OPTION> USER> PH-D-SL2
1 Setting of copy job reservation
To set to enable/disable copy job reservation when the Card Reader/Coin Manager is used.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Enabled, 1: Disabled
0
2 Orgnl size dtct ON/OFF at copyboard open
To set ON/OFF of original size detection while the Copyboard is opened.
When "0: OFF" is set, enter original size manually from the Control Panel.
When "1: ON" is set, original size is detected automatically.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
2 Job intvl setting at interruption copy
To set output interval between jobs at the time of interruption copy.
Sorting is difficult after interruption copy because of the continuous output of the next job. Paper
interval becomes longer when starting pickup for the next job after the last sheet of the previous
job is delivered.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: Continuous output of the interruption copy and the next job
1: Starting pickup for the next job after the interruption copy is delivered all.
2: Starting pickup for the next job after the previous job is delivered all. (For all jobs)
0
774
8. Service Mode