Canon imageRUNNER ADVANCE 4551i Service Manual page 360

How to use
1. Use this function from SITUATION mode.
Service Mode > SITUATION > Troubleshooting > Forcible stop of paper feed
The following service modes can be operated from this SITUATION mode.
COPIER > TEST > P-STOP > PRINTER
COPIER > TEST > PG > TYPE
COPIER > TEST > PG > PG-PICK
COPIER > TEST > PG > 2-SIDE
COPIER > TEST > PG > DENS-K
2. Execute a job (copy/test print).
3. Stop the paper at a specified position to identify the cause of the trouble.
Points to note when using
• Remove the paper being stopped with the normal jam removal procedure. After jam removal, the job is automatically
recovered.
• Display of standard jam code indicates that a jam occurs somewhere other than the specified position.
• When a job which the paper does not pass the specified stop position is executed, the setting to forcibly stop the paper
becomes disabled.
• Unfixed toner may be attached depending on the stop position. Use caution when handling it.
Setting Value
0: OFF
1: Outlet of the Vertical Path Slave Roller (cassette 1)
2: Outlet of the Vertical Path Slave Roller (cassette 2)
3: Outlet of the Vertical Path Slave Roller (cassette 3)*3
4: Outlet of the Vertical Path Slave Roller (cassette 4)
5: Outlet of the Deck Pull-out Roller roller
6: Inlet of the Registration Roller
7: Inlet of the Registration Roller (2nd side)
20: Registration Roller
21: Registration Roller (2nd side)
30: Inlet of the Fixing Assembly
31: Inlet of the Fixing Assembly (2nd side)
32: Outlet of the Fixing Assembly
33: Outlet of the Fixing Assembly (2nd side)
40: Outlet of the First Delivery *1
41: Outlet of the First Delivery (2nd side) *1
347
6. Troubleshooting