Canon imageRUNNER ADVANCE 4551i Service Manual page 797

COPIER > OPTION > USER
USBI-DSP 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
CTCHKDSP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
DFLT-ADJ 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
USBR-DSP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
ON/OFF USB input device MEAP driver use
To set whether to display "Use MEAP Driver for USB Input Device" in Settings/Registration menu.
When 0 is set, the item is not displayed so that the user administrator cannot change the setting.
When not allowing the user administrator to select whether to use the MEAP driver
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When setting 0, be sure to make the setting after the specified setting is completed.
0 to 1
0: OFF, 1: ON
1
Preferences> External Interface> USB Settings> Use MEAP Driver for USB Input Device
Display/hide of counter print
To set whether to display or hide "Print List" on the Counter Check screen.
Model name, model number information, counter check date and counter information can be output
as a total count management report.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
1
Tgt Auto Adj Gradation initial dspl set
To set the initial display of the target Full Adjust/Quick Adjust items on [Auto Adjust Gradation] in
[Settings/Registration].
This setting is enabled when EFI Controller is connected or only on the copy model which Adobe
PS/PDF is available.
When 0 is set, the adjustment item is not displayed.
When 1 to 3 is set, the target adjustment item (Copy/Printer/Both) is displayed to select.
When switching the initial display at the time of Auto Adjust Gradation
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: Adjustment item is not displayed.
1: "Copy" in the target adjustment items is selected.
2: "Printer" in the target adjustment items is selected.
3: "Both" in the target adjustment items is selected.
0
Adjustment/Maintenance> Adjust Image Quality> Auto Adjust Gradation
ON/OFF USB infrared devc MEAP driver use
To set whether to display "Use MEAP Driver for USB Infrared Device" in Settings/Registration
menu.
When 1 is set, whether to use MEAP driver can be selected on USB Settings screen.
When allowing the user administrator to select whether to use the MEAP driver
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
Preferences> External Interface> USB Settings> Use MEAP Driver for USB Infrared Device
784
8. Service Mode