Canon imageRUNNER ADVANCE 4551i Service Manual page 771

COPIER > OPTION > IMG-FIX
FIX-TEMP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TEMP-CON 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TEMPCON2 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
FX-S-TMP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set fix control temp table:Thin 1/Cst,MP
To change the fixing control temperature in the thin paper 1 mode at the Cassette feeding of the
25/35/45/51 cpm machine and the Multi-Purpose Tray feeding of the 25 cpm machine.
When the poor fixing, paper slip or paper curl occurs in the thin paper 1 mode
Enter the setting value, and then press OK key.
(Fixing grade priority)
0 to 2: +15 deg C
3 to 6: +12 to +3 deg C (3 deg C unit)
7: OFF
8 to 11: -3 to -12 deg C (3 deg C unit)
12 to 14: -15 deg C
(Productivity priority)
7
Set fixing control temp table: plain 3
To change the fixing control temperature in the plain paper 3 mode
When the poor fixing, paper slip or paper curl occurs in the plain paper 3 mode
Enter the setting value, and then press OK key.
(Fixing grade priority)
0 to 2: +15 deg C
3 to 6: +12 to +3 deg C (3 deg C unit)
7: OFF
8 to 11: -3 to -12 deg C (3 deg C unit)
12 to 14: -15 deg C
(Productivity priority)
7
Set fix ctrl temp table:Thin1/MP-tray
To change the fixing control temperature in the thin paper 1 mode at the Multi-Purpose Tray of the
35/45/51 cpm machine.
When the poor fixing, paper slip or paper curl occurs in the thin paper 1 mode at the Multi-purpose
Tray
Enter the setting value, and then press OK key.
(Fixing grade priority)
0 to 2: +15 deg C
3 to 6: +12 to +3 deg C (3 deg C unit)
7: OFF
8 to 11: -3 to -12 deg C (3 deg C unit)
12 to 14: -15 deg C
(Productivity priority)
7
Set fixing temperature: Curl correction
To change the fixing temperature to correct the curl, the low fixing and the paper slip in the fixing
N1 mode and N3 mode at the high humidity environment
When the curl, the low fixing or the paper slip occurs in the fixing N mode
Enter the setting value, and then press OK key.
(Fixing grade priority)
0 to 2: +15 deg C
3 to 6: +12 to +3 deg C (3 deg C unit)
7: OFF
8 to 11: -3 to -12 deg C (3 deg C unit)
12 to 14: -15 deg C
(Productivity priority)
7
758
8. Service Mode