Canon imageRUNNER ADVANCE 4551i Service Manual page 919

Platen Cover Type W
Points to Note at Installation
• When installing this equipment to a model without ADF,
perform the work from "Installing the Equipment".
• When installing this equipment to a model without ADF,
use only the Copyboard Cover included in the package.
Checking the Contents
6x
Check Item When Turning OFF
the Main Power
Check that the main power is OFF.
1. Turn OFF the main power switch.
2. Check that the display in the Control Panel and the
lamp of the main power are turned off, and then
disconnect the power plug.
Installation Outline Drawing
1x
1x
Binding ; M4x8
2x
1x
Installation Procedure
■ Removing the ADF
● In the case of the Single Pass ADF
1.
4x
2.
2x
NOTE:
The removed screws and Rubber Caps will be used in step
6.
906
9. Installation