Canon imageRUNNER ADVANCE 4551i Service Manual page 705

COPIER > FUNCTION > INSTALL
CNT-INTV 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Supplement/Memo
Amount of Change per
Unit
CDS-CTL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
RDSHDPOS 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Required Time
Related Service Mode
Supplement/Memo
BIT-SVC 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set counter send interval to SC server
To set the interval of sending counter information to the sales company's server in a unit of one
hour.
This is displayed only when the Embedded-RDS third-party extended function is available.
When using the Embedded-RDS third-party extended function
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
1 to 168 (=1 week)
hour
24
Embedded-RDS: Function to send device information such as the device counter, failure, and
consumables to the sales company's server via SOAP protocol
1
Set country/area when using CDS
To set country/area to enable CDS.
When enabling CDS
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Country/area set in COPIER> OPTION> FNC-SW> CONFIG, CA (Canada), LA (Latin America)
and HK (Hong Kong)
It differs according to the location.
COPIER> OPTION> FNC-SW> CONFIG
CDS: Contents Delivery System
Auto adj of Reader shading position
To automatically adjust the Scanner Unit (for front side) position in feed direction when reading
the White Plate on the left edge of the Copyboard Glass.
The adjustment result is reflected to ADJ-S.
When replacing the Scanner Unit (for front side)
Select the item, and then press OK key.
At start of operation: START, During operation: ACTIVE, When operation finished normally: OK!
10 sec
COPIER> ADJUST> ADJ-XY> ADJ-S
Shading: It determines the white color reference by reading the White Plate.
OFF/ON of Web service of E-RDS
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set ON/OFF of Web service function of E-RDS.
When OFF is selected, authentication information cannot be obtained from E-RDS.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
1
692
8. Service Mode