Canon imageRUNNER ADVANCE 4551i Service Manual page 812

COPIER > OPTION > LCNS-TR
ST-BRDIM 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-BRDIM 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-VNC 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-VNC 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-WEB 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Install state dspl: PCL Barcode Printing
To display installation state of Barcode Printing for PCL when disabling and then transferring the
license.
When checking whether Barcode Printing for PCL is installed
1) Select ST-BRDIM.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-BRDIM.
When operation finished normally: OK!
According to the setting at shipment
Trns lcns key dspl: PCL Barcode Printing
To display transfer license key to use Barcode Printing for PCL when disabling and then
transferring the license.
- When replacing HDD
- When replacing the device
1) Select ST-BRDIM.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-BRDIM.
24 digits
Install state dspl of Remote Oprtr Soft
To display installation state of Remote Operators Software when disabling and then transferring
the license.
When checking whether Remote Operators Software is installed
1) Select ST-VNC.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-VNC.
When operation finished normally: OK!
According to the setting at shipment
Trns lcns dspl of Remote Operators Soft
To display transfer license key to use Remote Operators Software when disabling and then
transferring the license.
- When replacing HDD
- When replacing the device
1) Select ST-VNC.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-VNC.
24 digits
Install state dspl: Web Access Software
To display installation state of Web Access Software when disabling and then transferring the
license.
When checking whether Web Access Software is installed
1) Select ST-WEB.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-WEB.
When operation finished normally: OK!
According to the setting at shipment
799
8. Service Mode