Canon imageRUNNER ADVANCE 4551i Service Manual page 772

COPIER > OPTION > IMG-FIX
TMP-TBL2 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TMP-TBL3 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TMP-TBL4 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TMP-TBL5 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Set fixing control temp table: Thick 1
To change the fixing control temperature in the thick paper 1 mode
When the curl, the low fixing or the paper slip occurs in the thick paper 1 mode
Enter the setting value, and then press OK key.
(Fixing grade priority)
0 to 2: +15 deg C
3 to 6: +12 to +3 deg C (3 deg C unit)
7: OFF
8 to 11: -3 to -12 deg C (3 deg C unit)
12 to 14: -15 deg C
(Productivity priority)
7
Set fixing control temp table: Thick 2
To change the fixing control temperature in the thick paper 2 mode
When the curl, the low fixing or the paper slip occurs in the thick paper 2 mode.
Enter the setting value, and then press OK key.
(Fixing grade priority)
0 to 2: +15 deg C
3 to 6: +12 to +3 deg C (3 deg C unit)
7: OFF
8 to 11: -3 to -12 deg C (3 deg C unit)
12 to 14: -15 deg C
(Productivity priority)
7
Set fixing control temp table: Thick 3
To change the fixing control temperature in the thick paper 3 mode
When the curl, the low fixing or the paper slip occurs in the thick paper 3 mode
Enter the setting value, and then press OK key.
0 to 14
0 to 2: +15 deg C
3 to 11: +12 to -15 deg C (3 deg C unit)
12 to 14: -15 deg C
7
Thin paper curl correction mode
To change the fixing control temperature to correct the curl in the thin paper 2 mode
For the thin paper which is moist and soft
Enter the setting value, and then press OK key.
When using plain paper, set this mode to OFF.
0 to 2
0: OFF
1: S-thin paper mode (-10 deg C compared with thin paper mode table)
2: SS-thin paper mode (-15 deg C compared with thin paper mode table)
0
759
8. Service Mode