Canon imageRUNNER ADVANCE 4551i Service Manual page 960

■ Installing the Reader Heater
1.
2x
CAUTION:
• Soiling on the glass surface and the White Plate
affects reading. When removing or installing the
Copyboard Glass, be sure not to touch the glass
surface and the White Plate.
• If soiling is attached, clean it with lint-free paper.
White Plate
2.
3.
CAUTION:
Pull the rear side of the Drive Belt in the direction of the
arrow to move the Scanner Box to the center.
4.
NOTE:
Install the Cable Clamps in the direction as shown in the
figure.
947
9. Installation