Canon imageRUNNER ADVANCE 4551i Service Manual page 759

COPIER > OPTION > NETWORK
SSLMODE 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
SSLSTRNG 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
NW-WAIT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
WLAN-USE 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Setting of HTTP/HTTPS port open/close
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to open or close HTTP/HTTPS port.
When 1 is set while [Use HTTP] is ON and [SSL Settings] is OFF in Settings/Registration menu,
HTTP port is opened whereas HTTPS port is closed.
When 2 is set while both [Use HTTP] and [SSL Settings] are ON in Settings/Registration menu,
HTTP port is closed whereas HTTPS port is opened.
When limiting the port to open because of security concern
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: Normal, 1: Open HTTP port (80/8000) only, 2: Open HTTPS port (443/8443) only
0
Preferences> Network> TCP/IP Settings> Use HTTP
Management Settings> License/Other> MEAP Settings> SSL Settings
Allow weak encryption algorithm for SSL
To set whether to allow using weak encryption algorithm for SSL.
When 1 is set, weak encryption algorithm cannot be used.
When prohibiting weak encryption algorithm because of security concern
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Normal mode, 1: Secure mode ( Not used TLS_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_
RC4_128_MD5)
1
Set connect wait at deep sleep recovery
To set whether to send wakeup notice after the time set in Settings/Registration menu has elapsed
when recovering from deep sleep.
When 0 is set, wakeup notice is sent after "Waiting Time for Connection at Startup" has elapsed.
When 1 is set, wakeup notice is sent when the machine becomes ready for communication.
When a failure of the device management tool occurs
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Wait, 1: Not wait
0
Preferences> Network> Waiting Time for Connection at Startup
Setting of wireless LAN invalidation
To set whether to disable the wireless LAN.
Bringing in and installation of the wireless LAN equipment may be prohibited depending on user.
In such case, set 0 to prevent the wireless LAN to be used. When 0 is set, [Wireless Connection
Settings] is not displayed in [Settings/Registration].
When bringing in and installation of the wireless LAN equipment is prohibited
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
1
Preferences> Network> Wireless Connection Settings
746
8. Service Mode