Canon imageRUNNER ADVANCE 4551i Service Manual page 715

COPIER > FUNCTION > PART-CHK
FIN-CL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
FINCL-ON 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
Supplement/Memo
FIN-FAN 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
Supplement/Memo
FINFANON 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
Specify of oprtn Clutch: Fin-Y1
To specify the Clutch to operate.
When replacing the Clutch/checking the operation
Enter the setting value, and then press OK key.
Fin-Y1: 1 to 3
1: Lower stack delivery roller clutch (CL102)
2: Escape feed clutch (CL101)
3: Paddle clutch (CL103)
COPIER> FUNCTION> PART-CHK> FINCL-ON
Operation check of Clutch: Fin-Y1
To start operation check for the Clutch specified by FIN-CL.
After the clutch operates for the specified period of time (10 to 30 seconds), it automatically stops.
When replacing the Clutch/checking the operation
Select the item, and then press OK key.
- When the job starts during the operation of the clutch, the finisher sequence error jam occurs.
- When the error avoidance jam occurs during the operation of the clutch, the jam becomes the
error immediately.
During operation: ACTIVE, At normal termination: OK, At abnormal termination: NG
COPIER> FUNCTION> PART-CHK> FIN-CL
Finisher-Y1
Specification of oprtn Fan: Fin-Y1
To specify the Fan to operate.
When replacing the Fan/checking the operation
Enter the setting value, and then press OK key.
1:Cooling Fan
COPIER> FUNCTION> PART-CHK> FINFANON
Finisher-Y1
Operation check of fan: Fin-Y1
To start operation check of the fan specified by FIN-FAN.
After the fan operates for the specified period of time (10 to 30 seconds), it automatically stops.
When replacing the Fan/checking the operation
Select the item, and then press OK key.
During operation: ACTIVE, At normal termination: OK, At abnormal termination: NG
COPIER> FUNCTION> PART-CHK> FIN-FAN
702
8. Service Mode